A practical decision guide to when a monitor riser still works on a 24-inch desk, when it makes the setup feel tighter, and when a monitor arm is the better fix.
Image source: Unsplash.
The honest answer is:
sometimes yes, but only if your 24-inch desk already gives you enough monitor distance.
That is the part people skip.
A monitor riser is useful when the problem is simple height. It becomes the wrong tool when the real problem is that the screen already sits too close on a shallow desk.
That is why a 24-inch deep desk changes the decision.
Twenty-four inches is often a workable minimum for a modern flat-panel monitor, but it is not generous. Once the monitor stand, keyboard, mouse, and a little front-edge comfort all have to share that depth, there is not much room left for mistakes. A riser can help if it lifts the screen without pushing the setup forward. It can also make the desk feel worse if it adds bulk and steals the little breathing room you had.
The official ergonomics guidance from OSHA, Mayo Clinic, and Cornell stays consistent on the basics:
The riser decision is really just an application of those three points.
You probably do need a monitor riser on a 24-inch desk if:
You probably do not need a monitor riser if:
That is the short version.
On a deeper desk, a monitor riser is often a straightforward choice.
On a 24-inch desk, the answer gets more conditional because depth is already tight enough that the monitor's footprint matters almost as much as its height.
This is the practical reality:
If the panel already lands close to your face, putting it on a riser does not solve the important problem. Sometimes it makes the setup look cleaner while leaving the viewing distance just as compromised.
That is why 24 inches is not "too shallow for every riser." It is just shallow enough that you have to be honest about what the riser is fixing.
If you have not already worked through the broader sizing question, How deep should a desk be for one monitor vs two? is the better starting point.
A monitor riser is useful when the setup is fundamentally close to correct and mainly needs lift.
That usually looks like this:
In that situation, a riser can do three helpful things:
That can be a very good trade on a 24-inch desk, especially if:
This is where risers still make a lot of sense. Not every shallow desk needs a monitor arm. Some just need a screen that sits a little higher and a little tidier.
This is the part that matters more.
If the screen already feels too close, a riser is usually the wrong category.
That happens more often on 24-inch desks because the monitor stand already consumes a meaningful share of the depth. If you then add a riser with its own legs, shelf, or drawer footprint, you may not gain any real distance at all. In some cases, the usable keyboard area feels even tighter.
This is the classic bad purchase pattern:
That is not a riser failure.
It is a diagnosis failure.
The screen did not need more height first. It needed better placement.
If that sounds like your desk, the better follow-up is usually Monitor arm vs monitor riser: which is better for posture? or Monitor arms that work on small desks.
The clearest sign is this:
the monitor feels low, but not crowded.
That means:
That is a great riser setup.
In that case, the riser is doing exactly what it should do: simple height correction.
The clearest sign is the opposite:
the monitor feels low and too close at the same time.
That usually shows up as:
That is not really a riser problem anymore.
That is a placement problem, and a monitor arm is better because it can change both height and depth.
Cornell's workstation guidance is especially useful here because it treats distance and screen placement as part of one posture system, not separate tweaks. If the monitor should sit about an arm's length away and you cannot get there comfortably on the current stand, a riser is often just solving the less important half of the issue.
Desk depth and monitor size are tightly connected.
On a 24-inch desk:
That is not because large screens automatically need an arm. It is because larger screens usually feel better with a little more distance, and a 24-inch surface does not give away much extra room.
So the bigger the screen gets, the less forgiving the riser decision becomes.
This is one of the most overlooked variables.
Two monitors of the same size can behave very differently on a 24-inch desk depending on the stand.
A compact stand leaves room for:
A bulky stand does the opposite:
That is why measuring only the screen size is not enough. On a shallow desk, the real question is where the front of the monitor panel ends up once the stand and riser are in place.
If you are trying to decide quickly, do this:
If that imagined version sounds better, a riser is probably reasonable.
If it still sounds cramped, a riser is probably not solving the right problem.
That test is simple, but it gets to the point faster than staring at product listings.
If the answer is yes, the best riser style is usually:
This is one of those cases where "smaller but better matched" beats "bigger and more feature-rich."
Large organizer risers with drawers can be useful, but on a 24-inch desk they can also overtake the surface quickly. A simpler platform often works better unless the desk is already very controlled and clutter-light.
If you want the product-side shortlist, Monitor risers that improve posture and desk organization is the direct follow-up.
There is one case where a riser can be surprisingly good on a 24-inch desk:
when the screen distance is already okay, but the stand is low and the desk needs storage.
In that situation, the riser is doing double duty:
That can make a compact desk feel calmer rather than more crowded.
So this is not an anti-riser article.
It is just a reminder that on a shallow desk, a riser has to earn its place by improving the real constraint, not just looking ergonomic.
On a 24-inch deep desk, a monitor riser is a good idea when your monitor already sits at a comfortable distance and mainly needs more height.
It is a bad idea when the screen already feels too close, the stand is bulky, or the desk is so tight that height without extra depth control does not actually improve comfort.
That is the cleanest way to decide:
A practical guide to why an expensive ergonomic chair can still feel wrong, with clearer checks for seat depth, lumbar position, armrest interference, desk-height mismatch, and body-fit issues before you blame price or buy another fix.
A practical guide to what to do when your desk and chair height do not match, with a clearer order for fitting the chair to your body first, fixing foot support, calming the keyboard-and-mouse zone, and deciding when the mismatch is real enough to justify replacement.